High Quality Deep Groove Ball Bearings 6001 2RS 6001zz Chrome Steel ABEC-1 ABEC-3 12*28*8mm

• Customization: Available
• Aligning: Non-Aligning Bearing
• Separated: Unseparated
• Model NO.: 6001 2RS
• Load Direction: Radial Bearing
• Material: Bearing Steel
• Contact Angle: 0
• Transport Package: Plastic Tube/White Box/Carton/Pallet
• Specification: 12*28*8mm
• Trademark: TIK or your mark
• Origin: China
• HS Code: 84821020
• Production Capacity: 850000 PCS a Month

Product Description

Descriptions
6001 2RS deep groove ball bearings are non-separable and require little attention or maintenance in service, capable of operating at high speeds and are widely used radial bearings. The inner and outer ring of single row deep groove ball bearings have a deep groove raceway. The bearings are mainly used to carry radial loads and a part of axial loads in two directions. This kind of bearing can carry much heavy axial loads after the increase of radial clearance, thus, it can take the place of high speed angular contact ball bearings.  Deep groove ball bearings have various types in structure, besides open type bearings, shields or seals at both sides can also be provided.

Features
The bearings are the most typical rolling bearings with extensive applications. The raceways in both of the rings are in arc groove form, which can carry radial and axial load in double directions. They can be applied in situations where high-rotating speed and low noise and low vibration are required.

Applications
All kinds of motors, toys, medical equipment, electric vehicles, sports and office equipment.

Types
Basic type; With snap ring groove on the outer ring (-N); With one shield (-Z) on one side or two shields (-2Z) on both sides; With one seal (-RS) on one side or two seals (-2RS) on both sides.
 

Model Number	6000 series, 6200 series, 6300 series, 6800 series, 6900 Series, 16000 series, 62200 series, 62300 series, 63000 series.
Type	Deep groove ball bearing.
Number of Row	Single Row.
Material	Supreme bearing steel AISI 52100 or stainless steel AISI 440, AISI 420.
Hardness	HRC 60-64.
Radial Clearance	C0, C2, C3, C4, C5.
Vibration & Noise	Z1V1, Z2V2, Z3V3.
Precision Rating	ABEC-1, ABEC-3, ABEC-5.
Sealing Type	open, ZZ, 2RS.
Grease	As per your requirement, such as Chevron SRI-2 ,Multemp PS2, Shell Alvania R2, Changcheng 2 and so on.
Certifications	ISO 9001:2015.
Brand Name	TIK.
Package	plastic tube package, single box package or as per buyer's requirement.
Place of Origin	China (Mainland).
Features	(1) high precision;
	(2) high speed;
	(3) high load carrying capacity;
	(4) low noise;
	(5) long life span.
Application	All kinds of motors, toys, medical equipment, electric vehicles, sports and office equipment.
Payment Term	TT, L/C, Western Union, Paypal.
Loading Port	Shanghai, Tianjin, Ningbo or Qingdao.
Samples	Free samples are available.

 

Bearing No.	Boundary dimensions				Basic load ratings (kN)		Limiting speed		Mass
	mm				Dynamic	Static	rpm		Kg
	d	D	B	rs min	Cr	Cor	Grease	Oil	≈
6000	10	26	8	0.3	4.58	1.98	29000	34000	0.019
6001	12	28	8	0.3	5.1	2.38	26000	30000	0.022
6002	15	32	9	0.3	5.58	2.85	22000	26000	0.031
6003	17	35	10	0.3	6	3.25	20000	24000	0.040
6004	20	42	12	0.6	9.38	5.02	18000	21000	0.068
6005	25	47	12	0.6	10	5.85	15000	18000	0.078
6006	30	55	13	1	13.2	8.3	13000	15000	0.110
6007	35	62	14	1	16.2	10.5	12000	14000	0.148
6008	40	68	15	1	17.2	11.8	10000	12000	0.185
6009	45	75	16	1	21	14.8	9200	11000	0.230
6010	50	80	16	1	22	16.2	8400	9800	0.258
6011	55	90	18	1.1	30.2	21.8	7700	9000	0.362
6012	60	95	18	1.1	31.5	24.2	7000	8300	0.385
6013	65	100	18	1.1	30.5	25.2	6500	7700	0.435
6014	70	110	20	1.1	38.1	30.9	6100	7100	0.602
6015	75	115	20	1.1	39.6	33.5	5700	6700	0.638
6016	80	125	22	1.1	47.6	39.8	5300	6200	0.850
6017	85	130	22	1.1	49.5	43.1	5000	5900	0.890
6018	90	140	24	1.5	58.2	49.7	4700	5600	1.160
6019	95	145	24	1.5	60.4	53.9	4500	5300	1.210
6020	100	150	24	1.5	60.2	54.2	4200	5000	1.250
6021	105	160	26	2	72.3	65.8	4000	4700	1.590
6022	110	170	28	2	82	73	3800	4500	1.960
6024	120	180	28	2	85	79.5	3500	4100	2.070
6026	130	200	33	2	106	101	3200	3800	3.160
6028	140	210	33	2	110	109	3000	3500	3.350
6030	150	225	35	2.1	126	126	2800	3200	4.080
6032	160	240	38	2.1	143	144	2600	3000	5.050
6034	170	260	42	2.1	168	172	2400	2800	6.760
6036	180	280	46	2.1	189	199	2300	2700	8.800
6038	190	290	46	2.1	197	215	2100	2500	9.180
6040	200	310	51	2.1	218	243	2000	2400	11.900

FAQ

Q1: Are you a manufacturer or a trading company?
A: We have been a professional manufacturer of bearings since 1995 with ISO9001:2015 certificate.

Q2: How is the quality level of your bearings?
A: Our bearings are made of supreme GCr15 bearing steel and are produced with the first class workmanship. The tolerance grade could be P0, P6, P5, P4. The vibration level could be Z1V1, Z2V2, Z3V3.

Q3: Can I get samples to see the quality?
A: Yes, samples are free, but the courier charge shall be borne by the buyer.

Q4: Could you offer OEM service and print my logo/mark on the products?
A: Yes, we could. Please send us your mark registration files, we shall print your logo/mark on the bearings and package.

Q5: How is the lead time?
A: For regular items that are in stock, we could make shipment immediately right after your payment. If the goods are not in stock, our production time is from 15 to 45 days according to the quantity.

Q6: What if I receive defective product for my order?
A: All our bearings are 100% inspected strictly before packing. If you receive any defective product, please provide us photos or videos to show the problem. After confirmation, we shall send you the new product as replacement free of charge.

Q7: What is your term of payment?
A: Term of payment is negotiable. Usually it is 30% deposit in advance, and the balance 70% is paid when the goods are ready for shipment.