Deep Groove Ball Bearings 6812 2RS, 6813 2RS, 6814 2RS, 6815 2RS, 6816 2RS, 6817 2RS, 6818 2RS, 6819 2RS, 6820 2RS, 6821 2RS, 6822 2RS, 6824 2RS, 6826 2RS P0 P6

• Customization: Available
• Aligning: Non-Aligning Bearing
• Separated: Unseparated
• Model NO.: 6812 2RS-6826 2RS
• Rows Number: Single
• Load Direction: Radial Bearing
• Material: Bearing Steel
• Contact Angle: 0
• Transport Package: Plastic Tube/White Box/Carton/Pallet
• Specification: 6812 2RS-6826 2RS
• Trademark: TIK or your mark
• Origin: China
• HS Code: 84821020
• Production Capacity: 850000 PCS a Month

Product Description

Descriptions
6800 series deep groove ball bearings are non-separable and require little attention or maintenance in service, capable of operating at high speeds and are widely used radial bearings. The inner and outer ring of single row deep groove ball bearings have a deep groove raceway. The bearings are mainly used to carry radial loads and a part of axial loads in two directions. This kind of bearing can carry much heavy axial loads after the increase of radial clearance, thus, it can take the place of high speed angular contact ball bearings.  Deep groove ball bearings have various types in structure, besides open type bearings, shields or seals at both sides can also be provided.

Features
The bearings are the most typical rolling bearings with extensive applications. The raceways in both of the rings are in arc groove form, which can carry radial and axial load in double directions. They can be applied in situations where high-rotating speed and low noise and low vibration are required.

Applications
All kinds of motors, toys, medical equipment, electric vehicles, sports and office equipment.

Types
Basic type; With snap ring groove on the outer ring (-N); With one shield (-Z) on one side or two shields (-2Z) on both sides; With one seal (-RS) on one side or two seals (-2RS) on both sides.
 

Model Number	6000 series, 6200 series, 6300 series, 6800 series, 6900 Series, 16000 series, 62200 series, 62300 series, 63000 series.
Type	Deep groove ball bearing.
Number of Row	Single Row.
Material	Supreme bearing steel AISI 52100 or stainless steel AISI 440, AISI 420.
Hardness	HRC 60-64.
Radial Clearance	C0, C2, C3, C4, C5.
Vibration & Noise	Z1V1, Z2V2, Z3V3.
Precision Rating	ABEC-1, ABEC-3, ABEC-5.
Sealing Type	open, ZZ, 2RS.
Grease	As per your requirement, such as Chevron SRI-2 ,Multemp PS2, Shell Alvania R2, Changcheng 2 and so on.
Certifications	ISO 9001:2015.
Brand Name	TIK.
Package	plastic tube package, single box package or as per buyer's requirement.
Place of Origin	China (Mainland).
Features	(1) high precision;
	(2) high speed;
	(3) high load carrying capacity;
	(4) low noise;
	(5) long life span.
Application	All kinds of motors, toys, medical equipment, electric vehicles, sports and office equipment.
Payment Term	TT, L/C, Western Union, Paypal.
Loading Port	Shanghai, Tianjin, Ningbo or Qingdao.
Samples	Free samples are available.

Bearing No.	Boundary dimensions				Basic load ratings (kN)		Limiting speed		Mass
	mm				Dynamic	Static	rpm		Kg
	d	D	B	rs min	Cr	Cor	Grease	Oil	≈
6800	10	19	5	0.3	1.83	0.925	32000	38000	0.005
6801	12	21	5	0.3	1.92	1.04	29000	35000	0.006
6802	15	24	5	0.3	2.08	1.26	26000	31000	0.007
6803	17	26	5	0.3	2.81	1.72	24000	28000	0.008
6804	20	32	7	0.3	4	2.47	21000	25000	0.019
6805	25	37	7	0.3	4.3	2.95	18000	21000	0.022
6806	30	42	7	0.3	4.7	3.65	15000	18000	0.026
6807	35	47	7	0.3	4.9	4.05	13000	16000	0.029
6808	40	52	7	0.3	4.95	4.2	12000	14000	0.033
6809	45	58	7	0.3	6.2	5.4	11000	12000	0.040
6810	50	65	7	0.3	6.6	6.1	9600	11000	0.052
6811	55	72	9	0.3	8.8	8.1	8700	10000	0.083
6812	60	78	10	0.3	11.5	10.6	8000	9400	0.104
6813	65	85	10	0.6	11.9	11.5	7400	8700	0.126
6814	70	90	10	0.6	12.1	11.9	6900	8100	0.134
6815	75	95	10	0.6	12.5	12.9	6400	7600	0.142
6816	80	100	10	0.6	12.7	13.3	6000	7100	0.150
6817	85	110	13	1	18.7	19	5700	6700	0.266
6818	90	115	13	1	19	19.7	5400	6300	0.279
6819	95	120	13	1	19.3	19.7	5000	5900	0.705
6820	100	125	13	1	19.6	21.2	4800	5600	0.309
6821	105	130	13	1	19.8	23.9	4600	5400	0.324
6822	110	140	16	1	28.1	30.7	4300	5100	0.606
6824	120	150	16	1	29	33	4000	4700	0.655
6826	130	165	18	1.1	36.9	41.2	3700	4300	0.939
6828	140	175	18	1.1	38.2	44.4	3400	4000	1.000
6830	150	190	20	1.1	47.8	54.9	3100	3700	1.400
6832	160	200	20	1.1	48.5	57	2900	3400	1.230
6834	170	215	22	1.1	60	70.5	2700	3200	1.630
6836	180	225	22	1.1	60.5	73	2600	3000	2.030
6838	190	240	24	1.5	73	88	2400	2900	2.620
6840	200	250	24	1.5	74	91.5	2300	2700	2.730

FAQ

Q1: Are you a manufacturer or a trading company?
A: We have been a professional manufacturer of bearings since 1995 with ISO9001:2015 certificate.

Q2: How is the quality level of your bearings?
A: Our bearings are made of supreme GCr15 bearing steel and are produced with the first class workmanship. The tolerance grade could be P0, P6, P5, P4. The vibration level could be Z1V1, Z2V2, Z3V3.

Q3: Can I get samples to see the quality?
A: Yes, samples are free, but the courier charge shall be borne by the buyer.

Q4: Could you offer OEM service and print my logo/mark on the products?
A: Yes, we could. Please send us your mark registration files, we shall print your logo/mark on the bearings and package.

Q5: How is the lead time?
A: For regular items that are in stock, we could make shipment immediately right after your payment. If the goods are not in stock, our production time is from 15 to 45 days according to the quantity.

Q6: What if I receive defective product for my order?
A: All our bearings are 100% inspected strictly before packing. If you receive any defective product, please provide us photos or videos to show the problem. After confirmation, we shall send you the new product as replacement free of charge.

Q7: What is your term of payment?
A: Term of payment is negotiable. Usually it is 30% deposit in advance, and the balance 70% is paid when the goods are ready for shipment.