Single row angular contact ball bearings can carry axial load acting in one direction only. In many applications, angular contact ball bearings in pairs or multi-arrangement should be used. The axial load carrying capacity of angular contact ball bearings increases with the increase of contact angle.
Individual bearings of this type are capable of taking radial loads and also axial loads in one direction. Contact angles of 15°, 25°, 30°, and 40° are available. The larger the contact angle, the higher the axial load capacity. For high-speed operation, however, the smaller contact angles are preferred. Usually, two bearings are used in duplex pairs, and the clearance between them must be adjusted properly.
Pressed steel cages are commonly used, however, for high precision bearings with a contact angle less than 30°, polyamide resin cages are often used.
Model Number |
7000 series, 7200 series, 7300 series, 7400 series, 7900 series. |
Type |
Ball. |
Number of Row |
single row. |
Contact Angle |
15°, 25°, 40°. |
Material |
supreme chrome steel AISI 52100 or stainless steel AISI 440C. |
Cage Material |
steel, nylon, brass. |
Hardness |
HRC 60-64. |
Radial Clearance |
C0, C2, C3, C4, C5. |
Vibration |
ZV1, ZV2, ZV3. |
Precision Rating |
ABEC-1, ABEC-3, ABEC-5, ABEC-7, ABEC-9. |
Grease |
As per your requirement, such as Chevron SRI-2 ,Multemp PS2, Shell Alvania R2, Changcheng 2 and so on. |
Certifications |
ISO 9001:2015. |
Brand Name |
TIK. |
Package |
plastic tube package, single box package, industrial rolled package or as per buyer's requirement. |
Place of Origin |
China (Mainland). |
Features |
(1) high precision; |
(2) high speed; |
(3) low noise; |
(4) long life span. |
Application |
machine tool spindle, high-frequency motor, gas turbine, centrifugal separator, front wheel of small car, |
differential pinion shaft etc. |
Payment Term |
TT or L/C or Western Union. |
Port |
Shanghai, Tianjin or Qingdao. |
Samples |
Free samples are available. |
Bearing No. |
Boundary dimensions |
Basic load ratings(kN) |
Limiting speed |
Mass |
mm |
Dynamic |
Static |
rpm |
kg |
d |
D |
B |
Cr |
Cor |
Grease |
Oil |
≈ |
7901AC |
12 |
24 |
6 |
3.2 |
1.7 |
28,000 |
36,000 |
0.011 |
7902AC |
15 |
28 |
7 |
4.5 |
2.5 |
24,000 |
32,000 |
0.015 |
7903AC |
17 |
30 |
7 |
4.8 |
2.7 |
22,000 |
30,000 |
0.017 |
7904AC |
20 |
37 |
9 |
6.4 |
4 |
20,000 |
28,000 |
0.035 |
7905AC |
25 |
42 |
9 |
7.5 |
5.2 |
18,000 |
26,000 |
0.042 |
7906AC |
30 |
47 |
9 |
7.9 |
6 |
16,000 |
24,000 |
0.048 |
7907AC |
35 |
55 |
10 |
11.7 |
8.8 |
14,000 |
22,000 |
0.075 |
7908AC |
40 |
62 |
12 |
14.1 |
10.1 |
12,000 |
20,000 |
0.110 |
7909AC |
45 |
68 |
12 |
15.4 |
12.2 |
10,000 |
18,000 |
0.130 |
7910AC |
50 |
72 |
12 |
16.1 |
14.8 |
8,000 |
16,000 |
0.140 |
7911AC |
55 |
80 |
13 |
18.7 |
17.5 |
7,500 |
15,000 |
0.183 |
7912AC |
60 |
85 |
13 |
19 |
18 |
7,000 |
14,000 |
0.198 |
7913AC |
65 |
90 |
13 |
19.4 |
20 |
6,500 |
13,000 |
0.212 |
7914AC |
70 |
100 |
16 |
27.1 |
26.3 |
6,300 |
12,000 |
0.342 |
7915AC |
75 |
105 |
16 |
27 |
27.7 |
6,000 |
10,000 |
0.360 |
7916AC |
80 |
116 |
16 |
27.5 |
29 |
5,500 |
10,000 |
0.381 |
7917AC |
85 |
120 |
18 |
38 |
39.1 |
5,000 |
9,000 |
0.542 |
7918AC |
90 |
125 |
18 |
39.8 |
44.5 |
5,000 |
8,500 |
0.560 |
7919AC |
95 |
130 |
18 |
40 |
45.5 |
4,500 |
8,500 |
0.604 |
7920AC |
100 |
140 |
20 |
46.4 |
50 |
4,300 |
8,200 |
0.808 |
7921AC |
105 |
145 |
20 |
47 |
55.2 |
4,000 |
8,000 |
0.830 |
7922AC |
110 |
150 |
20 |
49.7 |
55.3 |
3,800 |
7,500 |
0.880 |
7924AC |
120 |
165 |
22 |
68.4 |
77.6 |
3,600 |
7,200 |
1.150 |
7926AC |
130 |
180 |
24 |
73.4 |
88.1 |
3,400 |
7,000 |
1.540 |
7928AC |
140 |
190 |
24 |
74.5 |
90.2 |
3,200 |
6,800 |
1.640 |
7930AC |
150 |
210 |
28 |
95.6 |
117.2 |
3,000 |
6,500 |
2.970 |
7932AC |
160 |
220 |
28 |
135.4 |
158.6 |
2,800 |
6,300 |
3.120 |
FAQ
Q1: Are you a manufacturer or a trading company?
A: We have been a professional manufacturer of bearings since 1995 with ISO9001:2015 certificate.
Q2: How is the quality level of your bearings?
A: Our bearings are made of supreme GCr15 bearing steel and are produced with the first class workmanship. The tolerance grade could be P0, P6, P5, P4. The vibration level could be Z1V1, Z2V2, Z3V3.
Q3: Can I get samples to see the quality?
A: Yes, samples are free, but the courier charge shall be borne by the buyer.
Q4: Could you offer OEM service and print my logo/mark on the products?
A: Yes, we could. Please send us your mark registration files, we shall print your logo/mark on the bearings and package.
Q5: How is the lead time?
A: For regular items that are in stock, we could make shipment immediately right after your payment. If the goods are not in stock, our production time is from 15 to 45 days according to the quantity.
Q6: What if I receive defective product for my order?
A: All our bearings are 100% inspected strictly before packing. If you receive any defective product, please provide us photos or videos to show the problem. After confirmation, we shall send you the new product as replacement free of charge.
Q7: What is your term of payment?
A: Term of payment is negotiable. Usually it is 30% deposit in advance, and the balance 70% is paid when the goods are ready for shipment.