CAS No.: | 9002-89-5 |
---|---|
Formula: | Yes |
EINECS: | Yes |
Type: | Synthesis Material Intermediates |
Appearance: | Powder |
Quality: | Industrial |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Product Introduction
Polyvinyl alcohol powder(PVA) is a non-ionic cellulose used in building materials, which can be dissolved in hot or cold water to form a transparent solution with a specific viscosity.
Normally PVA is widely used in powder chemical building materials in a variety of dry powder putty, dry powder mortar additives and ceramic tile binder, plaster binder, can effectively increase the cement.Mortar adhesion, fluidity and slow down the cement surface drying time, increase the coating adaptability, prevent the cement coating cracking.
Application of wall putty additive polyvinyl alcohol pva 2488 and pva 1788
Cehmical and physical parameters of wall putty additive polyvinyl alcohol pva 2488 and pva 1788
PVA1788
Items |
Specification |
Results |
Appearance |
White Flake |
White Flake |
Alcoholysis Degree,% |
87-89 |
87.93 |
Volatily,% |
≤ 5.0 |
3.7 |
Ash,% |
≤ 0.7 |
0.6 |
P H Value |
5-7 |
6.6 |
Viscosity. mpa.s |
20.5-24.5 |
21.5 |
PVA2488
Items |
Specification |
Results |
Appearance |
White Powder |
White Powder |
Alcoholysis Degree,% |
86-90 |
89 |
Volatily,% |
≤ 5.0 |
3 |
Ash,% |
≤ 0.7 |
0.4 |
Package&Shiping
____________________________________________________
The solid is 25kg bag, inner plastic film, outer plastic woven bag. The product should be stored in a dry, ventilated and cool
place indoors. Do not get damp. It is strictly forbidden to store it with inflammable, corrosive and toxic materials.
Factory Show:
Usage:
PVA can be used in powder building materials , after stirring and mixing evenly, it could be use. Addition of advice: 0.3-3%of the total putty powder.
KP series use 100-120mesh when product dry glue powder, below 100 mesh it dissolves slow, difficult completely dissolve, when over 120 mesh, it is easy to agglomerate. Dry-mixed mortar use 80-120mesh. Powder putty use above 120 mesh, because below 120 mesh it is difficult to dissolve and make the surface unsmooth.
Suppliers with verified business licenses